Window, siding, and door replacement in Belvedere, CA
Custom Exteriors serves Belvedere homeowners with three product lines we install exclusively: Infinity by Marvin fiberglass windows and patio doors, James Hardie fiber cement siding, and ProVia and Therma-Tru entry doors. All three are built to hold up to wind, fog, and salt air. Every project is installed by our own full-time employee crews, not subcontractors. Based in Pleasanton since 1997, we have completed more than 30,000 projects.
Schedule a no-pressure consultation
What we install in Belvedere
We replace windows, patio doors, siding, and entry doors. Pick the project you're planning, or see the section on combining projects below.
Replacement windows
Infinity by Marvin fiberglass windows are the only windows we install. Fiberglass frames don't rot, swell, or rust, which matters in a city surrounded by water on nearly every side. Ultrex fiberglass expands and contracts at nearly the same rate as glass, so seals stay tight in wind off Raccoon Strait and Richardson Bay. Multiple glass packages are available to meet Title 24, California's energy code.
Belvedere window projects are usually about the view. Large picture windows keep sightlines to the bay, Angel Island, and San Francisco. Casement windows seal tightly against the frame on wind-exposed hillsides.
Replacement windows in Belvedere
James Hardie siding
James Hardie fiber cement is the only siding we install. It resists rot, moisture, and pests, it's classified as noncombustible, and it carries a 30-year non-prorated product warranty. On water-facing walls, it replaces wood siding that has softened, peeled, or stained from salt air, and ends the repainting cycle. ColorPlus Technology, James Hardie's factory-baked finish, holds its color in strong sun reflecting off the water.
CTA: Learn more about James Hardie siding
Patio doors
Infinity by Marvin patio doors use the same Ultrex fiberglass as our windows, in sliding, French, and bi-fold styles. On homes with view decks, terraces, and lagoon-side docks, a wider patio door is often the upgrade that changes how a room feels.
See Infinity by Marvin patio doors
Entry doors
We install ProVia and Therma-Tru entry doors in fiberglass and steel. Both resist the swelling and sticking that damp bay air causes in older wood doors. Fiberglass doors come in realistic wood-grain finishes, so you can keep a traditional look without the upkeep.
Belvedere homes we work on
What your home needs depends on how much weather it takes and how it's built. These are the Belvedere home types we see most often.
- Hillside homes on Belvedere Island. Many homes step down steep lots toward the water, with large view windows and limited street access. Replacement here is about glass size, sightlines, and planning how products get to the house.
- Waterfront homes on Corinthian Island and the shoreline. Homes closest to the water take the most wind, moisture, and salt. Rotting wood frames, corroded metal windows, and failing siding show up here first.
- Belvedere Lagoon homes. Homes along the lagoon often open to docks and decks, so patio doors and large glass are common projects. Lagoon homes are in their own zoning district, and the property owners association may have its own requirements.
Do you need a design review or a permit in Belvedere?
Usually a building permit, and usually a quick design review exemption rather than full design review. The City of Belvedere says most exterior changes need planning review, even when a building permit isn't required. For straight replacements of windows and siding, that review is typically a Design Review Exemption, a staff determination the City says usually takes 1 to 2 days. Here's how it works.
- Building permit. Belvedere requires a building permit for all alterations and repairs. The narrow exceptions don't cover window replacement or siding replacement over 100 square feet.
- Design Review Exemption. The City lists most replacements and repairs of windows and siding as exempt from full design review. You still file a Design Review Exemption Application, and City staff make the final determination.
- Changes in appearance. New or resized openings, or changes to materials or colors that don't meet the City's materials standards, go through staff-level or Planning Commission design review instead.
- Belvedere Lagoon homes. Check with the Belvedere Lagoon Property Owners Association before you finalize plans.
Custom Exteriors confirms which filings apply to your home, prepares the product specifications and window and door schedule the City asks for, and pulls the building permit.
Planning more than one project? Start here.
If you're replacing siding and your windows are original, do them together. With the siding off, we can install new windows using the new construction method, so every opening is fully flashed and sealed against wind-driven rain. Doing the windows later usually means cutting into new siding. In Belvedere, combining projects can also mean one round of City filings instead of two.
If you're replacing only one thing, start with whatever is failing. Fogged or drafty windows, soft or salt-stained siding, or a swollen front door are all signs it's time. We'll tell you honestly during your consultation if something can wait.
How a Belvedere project works
You don't need to visit our showroom to get started. Here's what to expect.
- In-home consultation. A design consultant comes to your Belvedere home, measures, checks the condition of your windows, siding, or doors, and walks you through options. We also look at site access, including stairs and parking. No pressure, no obligation.
- Itemized estimate. You get a detailed quote showing exactly what you're paying for.
- City filings and ordering. We confirm whether your project qualifies for a Design Review Exemption, prepare the paperwork, pull the building permit, and order your products.
- Installation. Our own full-time crew installs your project. If your home was built before 1978, we follow EPA lead-safe work practices.
- Warranty support. Your project is covered by the manufacturer warranties and our own product and labor warranty.
Want to see the products in person first? Our Pleasanton showroom has full-size displays of every window, door, and siding product we install.
Why Belvedere homeowners choose Custom Exteriors
Belvedere homeowners usually get more than one quote. Here's what you can verify.
- Full-time employee installers, not subcontractors. The crew that installs your project works for Custom Exteriors. Here's why that matters.
- AAMA Certified Master Installers, trained to the American Architectural Manufacturers Association's installation standards.
- Infinity by Marvin Platinum Partner, the manufacturer's highest certification tier.
- Since 1997, with more than 30,000 completed projects.
- Diamond Certified and BBB Accredited. See our awards and reviews.
- EPA Lead-Safe RRP Certified, which matters for every Belvedere home built before 1978.
Frequently asked questions
Q: Does Custom Exteriors serve all of Belvedere? A: Yes. We serve homeowners throughout Belvedere, including Belvedere Island, Corinthian Island, and Belvedere Lagoon. We also serve nearby Tiburon, Sausalito, and Mill Valley. Consultations are done at your home.
Q: Do I need design review to replace windows in Belvedere? A: Usually not full design review. The City lists most window and siding replacements as exempt from design review, but you still file a Design Review Exemption Application, and City staff make the final call. The City says that usually takes 1 to 2 days. If you're changing the size or location of openings, or switching materials or colors, full design review may apply. We confirm which applies before you order.
Q: Do I need a building permit to replace windows in Belvedere? A: Yes, in most cases. Belvedere requires building permits for alterations and repairs, with narrow exceptions such as siding repairs of 100 square feet or less. We pull the permit and schedule inspections as part of your project.
Q: I live on Belvedere Lagoon. Are there extra approvals? A: Possibly. Lagoon homes are in their own zoning district, and the Belvedere Lagoon Property Owners Association may have its own requirements. Check with the association before you finalize plans.
Q: What windows hold up best to salt air and wind? A: Fiberglass frames are one of the most durable choices for a waterfront home because they don't rot, swell, or rust. Infinity by Marvin fiberglass windows keep a tight seal in wind and pair with Title 24 glass packages that reduce heat gain on sunny, water-facing walls.
Q: How much does window or siding replacement cost in Belvedere? A: It depends on the size of your home, the products you choose, the condition of what's being replaced, and site access. Large view windows and stair-access homes usually cost more. See our window pricing guide and siding pricing guide for the main factors. Every consultation ends with a free, itemized estimate.
Q: Do you install vinyl windows? A: No. We install Infinity by Marvin fiberglass windows only. See our fiberglass versus vinyl comparison for why.
Ready to start your Belvedere project?
Schedule a free, no-pressure consultation at your home. We'll look at your windows, siding, or doors, walk you through options and the City filings that apply, and give you an itemized estimate, with no obligation.
Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) | Phone: (925) 249-2280
Financing options
We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.
Nearby areas we also serve
Custom Exteriors also serves nearby Tiburon, Sausalito, and Mill Valley in southern Marin, plus San Francisco and Richmond. View our full service area list.
Custom Exteriors Inc. | 2142 Rheem Drive Suite E, Pleasanton CA 94588 | (925) 249-2280 | custom-exteriors.com CA License #785361
Local Showroom
Design Expert



-1920.webp)



.webp)



-1920.webp)









