<

Window, siding, and door replacement in Daly City, CA

Custom Exteriors serves Daly City homeowners with three product lines we install exclusively: Infinity by Marvin fiberglass windows and patio doors, James Hardie fiber cement siding, and ProVia and Therma-Tru entry doors. Every project is installed by our own full-time employee crews, not subcontractors. We have served Bay Area homeowners since 1997, with more than 30,000 completed projects.

Schedule a no-pressure consultation

What we install in Daly City

We replace windows, patio doors, siding, and entry doors. Pick the project you're planning, or see the section on combining projects below.

Replacement windows

Infinity by Marvin fiberglass windows are the only windows we install, and they hold up well to Daly City's fog and salt air. They're made from Ultrex fiberglass, which will not rot, rust, or swell with moisture, and which expands and contracts at nearly the same rate as glass, so seals stay tight. Multiple glass packages are available to meet Title 24, California's energy code.

In fog belt homes, a well-sealed window also cuts down on the condensation and drafts that come with older single-pane frames.

See Infinity by Marvin windows

James Hardie siding

James Hardie fiber cement is the only siding we install. It resists rot, moisture, and pests, it's classified as noncombustible, and it carries a 30-year non-prorated product warranty. In Daly City, wood siding on side and rear walls rarely dries out in the fog, so fiber cement ends the cycle of rotting trim and failing paint.

Learn more about James Hardie siding

Patio doors

Infinity by Marvin patio doors use the same Ultrex fiberglass as our windows, in sliding, French, and bi-fold styles. On Daly City's split-level homes, where the back of the house often opens to a small yard or deck, a new patio door is one of the most noticeable upgrades.

See Infinity by Marvin patio doors

Entry doors

We install ProVia and Therma-Tru entry doors in fiberglass and steel. Our design consultants help you choose the style, glass, finish, and hardware. Fiberglass and steel doors also avoid the warping and swelling that wood doors suffer in damp coastal weather.

See entry door options

Daly City homes we work on

What your home needs depends on its age and how much fog and wind it takes. These are the Daly City home types we see most often.

  • Westlake and other post-war neighborhoods. Developer Henry Doelger began building Westlake in 1947, after building thousands of homes in San Francisco's Sunset District. Its mid-century and split-level homes sit on small lots, often with original windows and wood siding that are due for replacement. The most common projects are new windows for comfort and siding that stands up to fog.
  • Homes near the coast and Skyline. West-facing homes near the bluffs take the most wind, fog, and salt air in the city. Fiberglass windows and fiber cement siding are built for those conditions. If your home is near San Bruno Mountain or the coastal bluffs, check whether it falls in a fire hazard zone.
  • Older homes near the San Francisco border. Homes in the original neighborhoods near the city line often predate World War II. If your home was built before 1978, older paint layers may contain lead, so removal follows lead-safe practices.

Do you need a permit in Daly City?

Yes. Daly City requires a building permit for window, siding, and door replacements, and Custom Exteriors pulls it for you.

  • Windows. Every window replacement needs a permit and an inspection, including retrofit windows installed in existing frames. If the opening stays the same size and the original window met the egress code when the home was built, the new window does not have to meet current egress size rules. Making an opening smaller, or changing its size, brings in current requirements.
  • Siding. Replacing siding needs a permit. Siding is one of the home maintenance projects the City can issue without plans when the work can be described on the application.
  • Who pulls the permit. Daly City issues window permits to the person doing the work: a homeowner doing it themselves, or a California licensed contractor with a current Daly City business license.

Daly City's window rules are stricter than some nearby cities, so a contractor who skips the permit is a red flag.

Planning more than one project? Start here.

If you're replacing siding and your windows are original, do them together. With the siding off, we can install new windows using the new construction method, so every opening is fully flashed and sealed into the new wall. In the fog belt, that flashing is where hidden water damage usually gets found and fixed. Doing the windows later usually means cutting into new siding.

If you're replacing only one thing, start with whatever is failing. Fogged or drafty windows, soft or rotting siding, or a sticking front door are all signs it's time. We'll tell you honestly during your consultation if something can wait.

How a Daly City project works

You don't need to visit our showroom to get started. Here's what to expect.

  1. In-home consultation. A design consultant comes to your Daly City home, measures, looks at the condition of your windows, siding, or doors, and walks you through options. No pressure, no obligation.
  2. Itemized estimate. You get a detailed quote showing exactly what you're paying for.
  3. Permits and ordering. We pull the Daly City permit and order your products.
  4. Installation and inspection. Our own full-time crew installs your project, and the City inspects it. If your home was built before 1978, we follow EPA lead-safe work practices.
  5. Warranty support. Your project is covered by the manufacturer warranties and our own product and labor warranty.

Want to see the products in person first? Our Pleasanton showroom has full-size displays of every window, door, and siding product we install.

Why Daly City homeowners choose Custom Exteriors

You can verify who does the work and who stands behind it.

  • Full-time employee installers, not subcontractors. The crew that installs your project works for Custom Exteriors. Here's why that matters.
  • AAMA Certified Master Installers, trained to the American Architectural Manufacturers Association's installation standards.
  • Infinity by Marvin Platinum Partner, the manufacturer's highest certification tier.
  • Since 1997, with more than 30,000 completed projects across the Bay Area.
  • Diamond Certified and BBB Accredited. See our awards and reviews.
  • EPA Lead-Safe RRP Certified, which matters for Daly City's many homes built before 1978.

Frequently asked questions

Q: Does Custom Exteriors serve all of Daly City? A: Yes. We serve homeowners throughout Daly City, from Westlake and Serramonte to the neighborhoods along the San Francisco border and the coast. Consultations are done at your home.

Q: Do I need a permit to replace windows in Daly City? A: Yes. Daly City requires a permit and inspection for every window replacement, including retrofit windows in existing frames. Permits are issued to the person doing the work, or to a licensed contractor with a current Daly City business license. We pull the permit and schedule the inspection for you.

Q: Should I replace my windows and siding at the same time? A: If both are near the end of their life, usually yes. With the siding off, new windows can be fully flashed and sealed into the wall, and you avoid cutting into new siding later. If only one is failing, start there.

Q: What windows and siding hold up best in Daly City's fog? A: Materials that do not absorb water. Infinity by Marvin fiberglass windows will not rot, rust, or swell, and James Hardie fiber cement siding resists rot and moisture. Both avoid the paint failure and decay that fog causes on wood.

Q: How much does window or siding replacement cost in Daly City? A: It depends on the size of your home, the products you choose, and the condition of what's being replaced. See our window pricing guide and siding pricing guide for the main factors. Every consultation ends with a free, itemized estimate.

Q: Do you install vinyl windows? A: No. We install Infinity by Marvin fiberglass windows only. See our fiberglass versus vinyl comparison for why.

Ready to start your Daly City project?

Schedule a free, no-pressure consultation at your home. We'll look at your windows, siding, or doors, walk you through options and Daly City's permit requirements, and give you an itemized estimate, with no obligation.

Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) Phone: (925) 249-2280

Financing options

We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.

See financing details

Nearby areas we also serve

Custom Exteriors also serves nearby San Francisco, where we also install James Hardie siding. View our full service area list.

‍

Custom Exteriors Inc. | 2142 Rheem Drive Suite E, Pleasanton CA 94588 | (925) 249-2280 | custom-exteriors.com CA License #785361

Visit Our
Local Showroom
Showroom Details
Speak With A
Design Expert
Schedule a Consultaton

Convenient Financing Options

Make your project more affordable with easy financing options. On approved credit.
Five-Star Reviews

Read Our Google Reviews