<

Entry door replacement in San Francisco, CA

Custom Exteriors replaces entry doors for San Francisco homeowners with ProVia and Therma-Tru fiberglass and steel doors that stand up to fog, wind, and salt air. Our design consultants help you choose the style, glass, finish, and hardware, and our own full-time crews install the door, not subcontractors. We handle your San Francisco building permit, including any historic approvals. We have served Bay Area homeowners since 1997, with more than 30,000 completed projects.

Schedule a no-pressure consultation

Why San Francisco front doors wear out

In San Francisco, moisture is what ruins most front doors. Fog, wind-driven rain, and salt air keep wood doors damp for much of the year, especially in the Sunset, Richmond, and other western neighborhoods. The result is a door that swells, sticks, peels, and lets in drafts.

Common signs it's time to replace:

→ Swelling and sticking in wet months, then gaps once the door dries out.

→ Peeling paint or failing varnish that needs redoing every year or two.

→ Rot at the bottom rail and threshold, where water collects.

→ Drafts and street noise coming through worn weatherstripping and an old frame.

→ Worn locks and a loose frame that make the entry feel less secure.

A fiberglass door doesn't absorb water, so it doesn't swell, rot, or warp. With a new frame, threshold, and weatherstripping, the whole entry seals tight again.

Fiberglass or steel: which is right for you?

For most San Francisco homes, fiberglass is the better choice. It won't rot, swell, or rust in fog and salt air, and it can look like stained wood or a smooth painted door. Steel is a strong, secure option, but it relies on its finish to prevent rust, which matters more near the ocean.

Fiberglass entry doors

Fiberglass or steel: which is right for you?

For most San Francisco homes, fiberglass is the better choice. It won't rot, swell, or rust in fog and salt air, and it can look like stained wood or a smooth painted door. Steel is a strong, secure option, but it relies on its finish to prevent rust, which matters more near the ocean.

Fiberglass entry doors

Fiberglass or steel: which is right for you?

For most San Francisco homes, fiberglass is the better choice. It won't rot, swell, or rust in fog and salt air, and it can look like stained wood or a smooth painted door. Steel is a strong, secure option, but it relies on its finish to prevent rust, which matters more near the ocean.

Fiberglass entry doors

→ Looks: Realistic woodgrain (oak, mahogany, cherry, fir, and more) or a smooth finish.

→ Fog and salt air: Won't rot, swell, or rust.

→ Dents and scratches: Resists dents.

→ Best for: Most San Francisco homes, especially in the fog belt.

Steel entry doors

→ Looks: Smooth or embossed, with a painted finish.

→ Fog and salt air: Strong and stable, but the finish has to stay intact to prevent rust.

→ Dents and scratches: Strong, but can dent on impact.

→ Best for: Security-focused entries and modern painted doors away from direct ocean exposure.

See our fiberglass entry doors and ProVia steel entry doors pages for more detail.

Door options we install

We install entry doors from two manufacturers, ProVia and Therma-Tru, so you have real choices in style, finish, and price rather than a single line.

ProVia entry doors

→ Embarq fiberglass. A 2-1/2 inch thick door, 43% thicker than a standard 1-3/4 inch door, which leaves room for more insulation and helps block street noise.

→ Signet fiberglass. ProVia's most customizable line, with many panel styles, glass options, and woodgrain or smooth finishes in stain, glaze, or paint.

→ Heritage fiberglass. Woodgrain or smooth fiberglass with a hardwood edge that helps prevent warping.

→ Legacy steel. Built with 20-gauge steel for strength and rigidity, in many styles with or without glass and sidelites.

ProVia's painted Embarq and Signet doors carry a 15-year finish warranty.

Therma-Tru entry doors

→ Classic-Craft fiberglass. Therma-Tru's premium line, with detailed woodgrain and smooth options that rival custom wood doors.

→ Fiber-Classic fiberglass. Oak and mahogany woodgrain collections for a traditional stained look.

→ Smooth-Star fiberglass. A smooth, paintable fiberglass door.

→ Pulse fiberglass. Clean, contemporary designs with modern glass.

Fiber-Classic, Smooth-Star, and Pulse fiberglass doors are backed by Therma-Tru's lifetime limited warranty.

See all entry door options

Doors for San Francisco home styles

The right door depends on the house and, in some cases, on what San Francisco Planning will approve. Our design consultants match style, glass, and hardware to your home's architecture.

→ Sunset, Richmond, and Parkside homes. Many homes in the western neighborhoods have a front entry at the top of a stair, exposed to fog and wind. A fiberglass door with a tight-sealing frame and threshold solves the swelling and drafts these entries are known for. Paneled woodgrain or smooth painted doors both fit.

→ Victorians and Edwardians. In Noe Valley, the Haight, Pacific Heights, and similar neighborhoods, the front door is part of the facade's character. Fiberglass woodgrain doors with period panel styles and glass can keep that look. On landmark buildings and in historic districts, Planning may require the original wood door to stay or be replicated in wood, so we confirm your home's status first.

→ Hillside and mid-century homes. Homes in Twin Peaks, Diamond Heights, Glen Park, and Bernal Heights often suit clean, modern doors: smooth fiberglass or steel in a bold color, with flush or full-height glass.

→ Side and rear entries. Many San Francisco homes have a second entry on a narrow side yard or at the back of the lot. These doors take a beating from weather and often need replacing too.

San Francisco's permit and code rules for entry doors

San Francisco requires a building permit to replace any exterior door, and Custom Exteriors handles it for you. How the permit works depends on the opening and your home's historic status.

→ Same-size replacements. If the new door fits the same opening in the same location, it counts as an in-kind replacement. The permit is applied for online, with no plans required. The City's stated goal is to approve most permits within two business days.

→ Changing the opening. Making the opening wider, narrower, or taller, or moving it, requires plans and an over-the-counter permit with plan review. That includes adding sidelites to a single door in most cases.

→ Landmark buildings. Homes on San Francisco's list of landmark (Category A) historic buildings need Planning approval before the building permit. If you're not sure of your home's status, we help you check.

→ Safety glass. All glass in doors must be safety glazing. Every glass door we install meets this.

→ Doors near a property line. Exterior doors within 3 feet of a property line must be fire-rated for 1 hour. This can apply to side entries and rear doors on narrow lots. We check every door's location during your consultation and tell you upfront what the code requires.

See the doors before you choose

Our design consultants bring samples to your San Francisco home, so you don't have to travel to start. If you want to see full-size doors in person, our Pleasanton showroom has displays of every window, door, and siding product we install.

How a San Francisco door project works

1. In-home consultation. A design consultant comes to your San Francisco home, measures the opening, checks the frame, threshold, and location on the lot, and walks you through styles, glass, finishes, and hardware. No pressure, no obligation.

2. Itemized estimate. You get a detailed quote showing exactly what you're paying for.

3. Permit and ordering. We confirm your home's historic status, apply for the DBI permit (online for same-size replacements), and order your door. Entry doors are built to order, so lead times vary by manufacturer and options.

4. Installation. Our own full-time crew removes the old door and frame, checks the opening for water damage, and installs, seals, and adjusts the new door system. Most San Francisco homes were built before 1979, so we follow lead-safe work practices.

5. Inspection and warranty support. We schedule the City inspection. Your door is covered by the manufacturer's warranty and our own product and labor warranty.

Replacing other doors, windows, or siding too?

If your windows or siding are also due, plan them together so the finishes match and the openings are sealed as one system. We install Infinity by Marvin fiberglass windows and James Hardie siding in San Francisco. An entry door also works well as a standalone project.

Why San Francisco homeowners choose Custom Exteriors

→ Full-time employee installers, not subcontractors. The crew that installs your door works for Custom Exteriors. Here's why that matters.

→ San Francisco permits handled, including online in-kind permits, plan review for changed openings, and historic approvals.

→ Code checked upfront, including safety glazing and fire ratings near property lines.

→ Since 1997, with more than 30,000 completed projects across the Bay Area.

→ Lead-safe work. EPA Lead-Safe RRP Certified, which matters in a city where most homes predate 1979.

→ Diamond Certified and BBB Accredited. See our awards and reviews.

Frequently asked questions

Q: Do I need a permit to replace my front door in San Francisco? A: Yes. San Francisco requires a building permit from the Department of Building Inspection to replace any exterior door. Same-size replacements in the same opening are applied for online with no plans, and the City aims to approve most within two business days. Changing the opening requires plans, and landmark buildings need Planning approval first. We handle the permit for you.

Q: What kind of front door holds up best to San Francisco fog? A: Fiberglass. It doesn't absorb water, so it won't swell, rot, or warp the way wood doors do in fog and wind-driven rain. Paired with a new frame, threshold, and weatherstripping, it seals out drafts and moisture.

Q: Can I replace the front door on my Victorian? A: Usually, yes. Fiberglass woodgrain doors with period panel styles can match the look of an original door. If your home is a landmark building or in a historic district, San Francisco Planning may require the original wood door to stay or be replicated in wood. We help you confirm your home's status before you choose.

Q: Does my door need to be fire-rated? A: It depends on where the door is. San Francisco requires exterior doors within 3 feet of a property line to be fire-rated for 1 hour. That can apply to side and rear entries on narrow lots. We check every door's location during your consultation.

Q: How long does an entry door replacement take? A: Installation of a single entry door is usually completed in a day. Most of the wait is the door itself, since entry doors are built to order, plus any Planning review. We give you an estimated timeline when you order.

Q: How much does a new entry door cost in San Francisco? A: It depends on the door line, size, glass, finish, sidelites or transoms, hardware, the condition of the existing frame, and whether the opening changes. Lead-safe work, stair access, and historic review can add to the scope on San Francisco homes. Every consultation ends with a free, itemized estimate.

Ready to replace your front door?

Schedule a free, no-pressure consultation at your San Francisco home. We'll check your opening and any code or historic rules, walk you through styles, glass, finishes, and hardware, and give you an itemized estimate, with no obligation.

Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) | Phone: (925) 249-2280

Financing options

We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.

See financing details

Nearby areas we also serve

Custom Exteriors also installs entry doors in nearby Daly City, San Mateo, Oakland, Berkeley, and Sausalito. See everything we offer in San Francisco, or view our full service area list.

‍

Custom Exteriors Inc. | 2142 Rheem Drive Suite E, Pleasanton CA 94588 | (925) 249-2280 | custom-exteriors.com CA License #785361

Visit Our
Local Showroom
Showroom Details
Speak With A
Design Expert
Schedule a Consultaton

Convenient Financing Options

Make your project more affordable with easy financing options. On approved credit.
Five-Star Reviews

Read Our Google Reviews