James Hardie siding in Danville, with the Town's permit process handled
Custom Exteriors replaces siding on Danville homes with James Hardie fiber cement, and we prepare the plans and specifications the Town of Danville requires for a siding permit. Our own full-time crews install it, not subcontractors. James Hardie siding resists rot, moisture, and pests, is classified as noncombustible, and carries a 30-year non-prorated product warranty. We have served Danville and the San Ramon Valley from our Pleasanton showroom since 1997, with 30,000+ completed projects.
What Danville requires for a siding permit
The Town of Danville publishes its own submittal requirements for residential siding replacement, and they ask for more than a simple application. Here is what the Town asks for, and what we handle:

Why switching to James Hardie is not "like-for-like"
Danville defines a like-for-like replacement as new siding of the same type, material, and color. Replacing wood or hardboard siding with James Hardie fiber cement changes the material, so it follows the Town's new-siding path, with the full plan requirements above. Many homeowners do not expect that. We do it on every Danville project.
When extra review applies
Danville's handout notes two situations that can add review:
- Wildfire-Urban Interface (WUI) Fire Area properties may need additional Building Division review and submittal items.
- Homes on a Scenic Hillside or Major Ridgeline may need additional Planning Division review.
We check both for your address before we submit, so there are no surprises later.
Why Danville homes are ready for new siding
Most Danville homes were built during the town's growth in the 1970s, 1980s, and 1990s, and their original siding is now 30 to 50 years old. Danville developed as a residential suburb starting in 1947, grew quickly through the 1970s and 1980s, and incorporated as a town in 1982. The median home was built around 1980, and more than a quarter were built in the 1990s.
At that age, original siding tends to show:
- Soft, swollen, or flaking boards, especially near sprinklers and at the bottom courses.
- Paint that will not hold on south- and west-facing walls.
- Gaps at corners, trim, and windows where boards have shrunk or moved.
- Woodpecker damage on homes near Danville's open space and oak-covered hills.
When we remove old siding, we inspect the sheathing and repair water damage before the new siding goes on. If your home was built before 1978, older paint may contain lead. We are EPA Lead-Safe RRP Certified and follow lead-safe work practices.
Siding styles for Danville homes
James Hardie has profiles that suit Danville's traditional two-story homes, ranch homes, and custom homes in the hills.
- HardiePlank lap siding is the classic horizontal look and the most common choice for Danville homes.
- HardieShingle siding adds a cedar shake look to gables and accents.
- HardiePanel vertical siding creates a board and batten look for farmhouse-style updates.
- Hardie Artisan siding has a thicker profile and deeper shadow lines for custom homes.
- HardieTrim boards and soffit panels finish the job in the same durable material.
ColorPlus Technology, James Hardie's factory-baked finish, holds color longer than paint applied on site and is backed by a 15-year limited finish warranty. If your HOA requires a specific color, primed siding can be painted to match. Our East Bay siding color guide and full-size displays in our Pleasanton showroom help you choose.
Learn more about James Hardie siding
Fire resistance in Danville
Parts of Danville are mapped as Very High Fire Hazard Severity Zones under the State Fire Marshal's 2025 maps, along with High and Moderate areas, mostly near the hills and open space. The San Ramon Valley Fire Protection District, which serves Danville, adopted the 2025 California Wildland-Urban Interface Code with amendments applying to High and Very High zones.
James Hardie fiber cement siding is classified as noncombustible when tested to ASTM E136 and has a Class A flame spread rating under ASTM E84, so it will not ignite or add fuel to a fire. It meets the exterior wall covering requirement in California's wildfire construction standards on its own. No siding is fireproof, and roof, vents, eaves, and windows matter too.
Check your address on the State Fire Marshal's Fire Hazard Severity Zone viewer. If your home is in a mapped zone, we account for it in your submittal.
Replacing siding and windows together
If your windows date to the same era as your siding, replacing both at once usually gives you a better result. With the siding off, we can install new windows using the new construction method, so each opening is fully flashed and sealed. One submittal, one permit, one crew.
See our Danville replacement windows page for the Infinity by Marvin fiberglass windows we install.
Why Danville homeowners choose Custom Exteriors
Danville homeowners hire us because the process is handled, and because they can verify who does the work and who stands behind it.
- The Town's submittal, prepared for you. Plans, elevations, specifications, and the application.
- Full-time employee installers, not subcontractors. The crew that installs your siding works for Custom Exteriors. Here is why that matters.
- Local since 1997. We have served the San Ramon Valley from Pleasanton for nearly three decades, with 30,000+ completed projects.
- Third-party recognition. Diamond Certified and BBB Accredited. See our awards and reviews.
- Warranty coverage. James Hardie's product warranties plus our own product and labor warranty.
Frequently asked questions
Q: Do I need a permit to replace siding in Danville? A: Yes, in most cases. The Town of Danville requires a building permit and has its own submittal requirements for siding replacement, including a plan showing where the new siding goes and the type, material, and color of the new siding. Custom Exteriors prepares the submittal and handles the permit for you.
Q: Is replacing wood siding with James Hardie a like-for-like replacement? A: No. Danville defines like-for-like as the same type, material, and color. Switching from wood or hardboard to fiber cement changes the material, so the Town treats it as new siding, with full plan requirements. We prepare those plans as part of every Danville project.
Q: Do I need drawings to replace siding in Danville? A: Usually, yes. The Town asks for a plan showing your home's footprint, where the new siding goes, and orientation, plus elevations when needed. Plans must be 11 x 17 inches to 24 x 36 inches. We prepare them for you.
Q: My home is on a hillside. Does that change anything? A: It might. Danville notes that homes on a Scenic Hillside or Major Ridgeline may need additional Planning review, and homes in a Wildfire-Urban Interface Fire Area may need additional Building Division review. We check your address before we submit.
Q: Is James Hardie siding fire resistant? A: James Hardie siding is classified as noncombustible when tested to ASTM E136 and has a Class A flame spread rating under ASTM E84. No siding is fireproof, but noncombustible siding will not ignite or add fuel to a fire.
Q: How much does James Hardie siding cost in Danville? A: Cost depends on the size of your home, how much old siding has to come off, the condition of the wall underneath, the profile and finish you choose, and how much trim and soffit is involved. See our siding pricing guide for the main factors. We provide free, itemized estimates so you know exactly what you are paying for.
Ready to replace the siding on your Danville home?
Schedule a free, no-pressure consultation. We will look at your current siding, check for damage underneath, measure for your Town submittal, walk through profiles and colors, and give you an itemized estimate, with no obligation. Prefer to see the products first? Our Pleasanton showroom has full-size James Hardie displays.
Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) Phone: (925) 249-2280
Financing options
We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.
Nearby areas we also serve
Custom Exteriors also installs James Hardie siding in Alamo, Blackhawk, San Ramon, Walnut Creek, and Pleasanton. See everything we offer in Danville, or view our full service area list.
Local Showroom
Design Expert



-1920.webp)



.webp)



-1920.webp)









