James Hardie siding in Richmond, CA
Custom Exteriors replaces siding on Richmond homes with James Hardie fiber cement. It's noncombustible, which matters in Richmond's hillside fire zones, and it resists rot and moisture, which matters near the bay. Our own full-time crews install it, not subcontractors. James Hardie siding carries a 30-year non-prorated product warranty, and we have served Bay Area homeowners since 1997, with more than 30,000 completed projects.
Schedule a no-pressure consultation
Richmond's fire hazard zones grew in 2025
Richmond now has one of the largest Very High fire hazard areas in Contra Costa County, so siding choice matters more in the hills than it used to. The State Fire Marshal's 2025 map gave Richmond nearly 4,400 acres rated Very High, and the number of parcels in Very High zones roughly doubled from the 2009 map. The City Council adopted the new map on June 3, 2025.
The hazard is concentrated in the eastern hills near Wildcat Canyon. Neighborhoods like May Valley and East Richmond Heights, which were unrated before, now fall into a mix of Moderate, High, and Very High zones. Other areas moved the other way: Point Richmond is no longer rated, and Point Pinole dropped to Moderate.
What that means for you:
- Check your address. Use the City of Richmond's fire hazard map or CAL FIRE's Fire Hazard Severity Zone viewer to see your zone.
- Building requirements. Depending on your zone and project, California's wildfire building code (the California Wildland-Urban Interface Code, which replaced Chapter 7A of the Building Code on January 1, 2026) can set rules for the materials on your exterior walls.
- Your home, not just the map. The map measures hazard, not your home's individual risk. The materials on your home, including the siding, are one of the things you can control.
How James Hardie siding performs in a fire
James Hardie fiber cement siding does not burn. It's made mostly of cement, sand, and cellulose fibers, and it's classified as noncombustible when tested to ASTM E136. Wood siding and vinyl siding can't make that claim.
Here's what that means in practice:
- Noncombustible cladding. James Hardie siding won't ignite or add fuel to a fire when exposed to flame or embers.
- Class A flame spread. James Hardie siding has a Class A fire rating with a flame spread index of 0 when tested to ASTM E84. Class A is the highest class in that test.
- State Fire Marshal listed. HardiePlank, HardiePanel, HardieShingle, and HardieSoffit products are listed by the California State Fire Marshal for use in wildland-urban interface construction, on exterior walls and under eaves.
- A clear path through the code. California's wildfire construction standards accept noncombustible material as a compliant exterior wall covering. Fiber cement meets that on its own, without special treatments.
Siding is one part of a fire-resistant home, not the whole answer. No siding can guarantee a home survives a wildfire. Embers entering through vents, eaves, and windows, and combustible material close to the house, are major causes of home ignition. That's why we also recommend:
- Boxed eaves with HardieSoffit panels, which put the same noncombustible fiber cement on the underside of your roofline.
- HardieTrim boards around windows, doors, and corners instead of wood trim.
- Dual-pane windows with tempered glass, which resist breaking from heat better than single-pane glass.
- Clearing combustible material, like bark mulch, wood piles, and dense plantings, from the area right next to the house.
Learn more about James Hardie siding
Built for bay air, too
Closer to the water, the problem isn't fire. It's moisture. Homes near the bay in Point Richmond, the Richmond Annex, and Marina Bay take damp air and wind-driven rain, which keeps wood siding wet and leads to rot, swelling, peeling paint, and pest damage.
James Hardie fiber cement resists moisture, won't rot, and holds its shape through constant humidity. ColorPlus Technology, James Hardie's factory-baked finish, holds color longer than paint applied on site and is backed by a 15-year limited finish warranty. That ends the repainting cycle most wood-sided homes are stuck in.
When we remove old siding, we inspect the sheathing underneath and repair water-damaged sections before new siding goes on.
Richmond homes we re-side
What your siding project looks like depends on where your home sits and when it was built.
- Hillside homes in eastern Richmond. Homes near Wildcat Canyon, including El Sobrante Hills, May Valley, and Hilltop, are where fire performance matters most. Noncombustible siding, soffits, and trim are the priority.
- Point Richmond's historic homes. The Point Richmond Historic District has been on the National Register of Historic Places since 1979, with early 1900s Craftsman and Queen Anne homes. HardieShingle and HardiePlank profiles, with HardieTrim, keep the look of the original wood. We check whether any review applies before you choose products.
- Atchison Village. This National Register district of World War II housing is owned and managed by its residents' mutual housing corporation, so exterior changes may need the corporation's approval.
- Post-war and mid-century homes. Across the Richmond Annex and other neighborhoods, many homes still have original wood siding that's been painted again and again. Replacing it once ends that cycle.
Many Richmond homes were built before 1978 and may have lead paint. We're EPA Lead-Safe RRP Certified and follow lead-safe work practices during removal.
Siding styles for Richmond homes
James Hardie offers profiles for every Richmond home type, all with the same noncombustible performance.
- HardiePlank lap siding for classic horizontal siding on Craftsman, Victorian, and ranch homes.
- HardieShingle siding for the look of wood shingles, without the fire exposure of real wood.
- HardiePanel vertical siding for a board and batten look or clean modern lines.
- Hardie Artisan siding for a thicker profile and deeper shadow lines.
Our East Bay siding color guide and full-size displays in our Pleasanton showroom help you choose.
Permits and approvals in Richmond
Siding replacement in Richmond generally needs a building permit, and Custom Exteriors confirms what applies and pulls it for you.
- City or County. Most Richmond addresses are permitted through the City of Richmond. East Richmond Heights and El Sobrante are unincorporated Contra Costa County, so permits there go through the County.
- Fire hazard zones. If your home is in a mapped zone, the building department decides whether wildfire code requirements apply to your project. We confirm this during permitting and specify materials that meet it.
- Historic and co-op homes. Point Richmond homes may face historic review, and Atchison Village homes may need approval from the mutual housing corporation.
Replacing siding and windows together
If your windows are also near the end of their life, replace both at once. With the siding off, we can install new windows using the new construction method, so every opening is fully flashed and sealed into the new wall. Doing the windows later usually means cutting into new siding.
In fire zones, ask about tempered glass options. See our Richmond replacement windows page for the Infinity by Marvin fiberglass windows we install.
Why Richmond homeowners choose Custom Exteriors
You can verify who does the work and who stands behind it.
- Full-time employee installers, not subcontractors. The crew that installs your siding works for Custom Exteriors. Here's why that matters.
- Since 1997, with more than 30,000 completed projects across the Bay Area.
- Permits and inspections handled, including whether the City or the County has jurisdiction and any fire zone requirements.
- Third-party recognition. Diamond Certified and BBB Accredited. See our awards and reviews.
- Warranty coverage. James Hardie's product warranties plus our own product and labor warranty.
Frequently asked questions
Q: Is James Hardie siding fireproof? A: No siding is fireproof, but James Hardie siding is noncombustible. It's classified as noncombustible when tested to ASTM E136 and has a Class A flame spread rating under ASTM E84, so it won't ignite or add fuel to a fire. A home's overall fire resistance also depends on its roof, vents, eaves, windows, and the area around the house.
Q: Is my Richmond home in a fire hazard zone? A: It depends on your address. Richmond's 2025 map concentrates the hazard in the eastern hills near Wildcat Canyon, including parts of May Valley and East Richmond Heights. Point Richmond is no longer rated. Check your address on the City of Richmond's fire hazard map or CAL FIRE's online viewer.
Q: Do wildfire building codes apply to replacing my siding? A: It depends on your fire hazard zone and the scope of your project, and the building department makes that call. California's wildfire construction rules moved into the California Wildland-Urban Interface Code on January 1, 2026. Those rules accept noncombustible exterior wall coverings, and James Hardie siding is noncombustible. We confirm what applies during permitting.
Q: Can you replace siding on my Point Richmond home without changing its character? A: Yes. HardieShingle and HardiePlank profiles, with HardieTrim, keep the look of original wood siding and trim. If your home faces historic review, we provide the product details the review needs.
Q: Will fire-resistant siding lower my homeowners insurance? A: We can't promise that, because insurers set their own pricing and discounts. Ask your insurer which home hardening measures it recognizes. We provide product documentation for the James Hardie siding we install if your insurer asks for it.
Q: How much does James Hardie siding cost in Richmond? A: Cost depends on the size of your home, how much old siding comes off, the condition of the wall underneath, the profile and finish you choose, and how much trim and soffit work is involved. Hillside and two-story homes usually cost more. See our siding pricing guide for the main factors. Every consultation ends with a free, itemized estimate.
Ready to replace the siding on your Richmond home?
Schedule a free, no-pressure consultation. We'll look at your current siding, check for damage underneath, walk through profiles, colors, and fire-resistant options, and give you an itemized estimate, with no obligation.
Schedule a no-pressure consultation | Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) | Phone: (925) 249-2280
Financing options
We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.
Nearby areas we also serve
Custom Exteriors also installs James Hardie siding in Oakland, San Francisco, and Berkeley, and serves nearby San Pablo, Pinole, and Hercules. See everything we offer in Richmond, or view our full service area list.
Custom Exteriors Inc. | 2142 Rheem Drive Suite E, Pleasanton CA 94588 | (925) 249-2280 | custom-exteriors.com CA License #785361
Local Showroom
Design Expert



-1920.webp)



.webp)



-1920.webp)









