James Hardie siding replacement in Pleasant Hill, CA

Custom Exteriors replaces siding on Pleasant Hill homes and townhomes with James Hardie fiber cement, installed by our own full-time crews, not subcontractors. James Hardie siding resists rot, moisture, and pests, is classified as noncombustible, and comes with a 30-year non-prorated product warranty. We have served Pleasant Hill and Central Contra Costa County from our Pleasanton showroom since 1997, with 30,000+ completed projects.

Why Pleasant Hill homes are ready for new siding

Most Pleasant Hill homes have reached the age where original siding starts to fail. The median home in Pleasant Hill was built in 1972, and nearly half the city's housing went up between 1940 and 1969, much of it in the years around the city's 1961 incorporation. Original wood siding and early hardboard siding from that era are now 50 to 80 years old.

At that age, the same problems show up across Pleasant Hill neighborhoods:

• Rot and swelling at the bottom courses, especially on hardboard siding, which absorbs water at cut edges and nail holes.
• Peeling paint on south- and west-facing walls after decades of hot Central County summers.
• Gaps at trim, corners, and windows that let in moisture and pests.
• Constant repainting that no longer holds because the boards underneath are breaking down.

Replacing siding is also the right time to fix what is underneath it. When we remove old siding, we inspect the sheathing and repair damaged sections before the new siding goes on.

Why we install James Hardie siding

James Hardie fiber cement is the only siding we install, because it holds up to the conditions that wear out wood and hardboard siding. After evaluating siding products for nearly three decades, it is what we recommend to every homeowner.

• Rot and pest resistant. Fiber cement does not rot or swell when it gets wet and does not attract termites or woodpeckers.
• Noncombustible. James Hardie siding is classified as noncombustible when tested to ASTM E136. Wood and hardboard siding are not.
• Built for this climate. James Hardie engineers its siding for specific regional climates through its HardieZone system.
• A finish that lasts. ColorPlus Technology is a factory-applied, baked-on finish that holds its color far longer than paint applied on site.
• A real warranty. A 30-year non-prorated limited product warranty on the siding, plus a 15-year limited warranty on the ColorPlus finish.‍

Learn more about James Hardie siding

Siding styles for Pleasant Hill homes

The right James Hardie profile depends on your home's architecture. Pleasant Hill is mostly mid-century ranch homes, split-levels, and 1970s and 1980s two-story homes, plus townhome communities.

• HardiePlank lap siding is the classic horizontal look and the most common choice for Pleasant Hill ranch and split-level homes.
• HardiePanel vertical siding creates a board and batten look, a popular update for mid-century homes.
• HardieShingle siding gives you the cedar shake look for gables and accents, without the upkeep of real shakes.
• HardieTrim boards and soffit panels finish the job with the same durable material around windows, corners, and eaves.

Not sure which color fits? Our East Bay siding color guide is a good place to start, and our Pleasanton showroom has full-size siding displays you can see in daylight.

Townhomes, condos, and HOA communities

If you live in a townhome or condo community, your HOA usually controls siding, so approval comes first. Many Pleasant Hill communities were built in the 1970s and 1980s, and their original siding is reaching the same point as the single-family homes around them.

• Homeowners: check your CC&Rs and architectural review rules before planning a siding project. We provide the product specifications and color samples your application needs.
• HOA boards: James Hardie siding with ColorPlus finish reduces repainting cycles, which matters for long-term reserve planning. We can walk your board through profiles, colors, and an itemized estimate.

Permits and older homes

Siding replacement in Pleasant Hill usually needs a building permit from the City of Pleasant Hill Building Division, and Custom Exteriors handles it for you. Some projects also need City zoning review before the permit is issued. We manage the application and inspections as part of your project.

Many Pleasant Hill homes were built before 1978, which means older paint layers may contain lead. We are EPA Lead-Safe RRP Certified and follow lead-safe work practices when removing old siding.

Replacing siding and windows together

If your windows are also due for replacement, doing both at once usually gives you a better result. With the siding off, we can install new windows using the new construction method, which lets us fully flash and seal each opening. That is difficult to do as well once new siding is on the wall.

It also means one project, one crew, and one disruption instead of two. Many Pleasant Hill homes still have their original aluminum-frame windows. See our Pleasant Hill replacement windows page for the Infinity by Marvin fiberglass windows we install.

Why Pleasant Hill homeowners choose Custom Exteriors

Pleasant Hill homeowners hire us because they can verify who is doing the work and who stands behind it.

• Full-time employee installers, not subcontractors. The crew that installs your siding works for Custom Exteriors. Here is why that matters.
• Local since 1997. We have served Central Contra Costa County from Pleasanton for nearly three decades, with 30,000+ completed projects.
• Permits and inspections handled. We manage the City permit process from application to final inspection.
• Third-party recognition. Diamond Certified and BBB Accredited. See our awards and reviews.
• Warranty coverage. James Hardie's product warranties plus our own product and labor warranty.

Frequently asked questions

Q: Do I need a permit to replace siding in Pleasant Hill? A: In most cases, yes. Permits come from the City of Pleasant Hill Building Division, and some projects also need City zoning review. Custom Exteriors handles the permit and inspections for your project.

Q: How much does James Hardie siding cost in Pleasant Hill? A: Cost depends on the size of your home, how much old siding has to come off, the condition of the wall underneath, the James Hardie profile and finish you choose, and how much trim is involved. Two-story homes and homes with complex rooflines cost more to side than single-story ranch homes. See our siding pricing guide for the main factors. We provide free, itemized estimates so you know exactly what you are paying for.

Q: Can I replace the siding on my townhome? A: Usually only with HOA approval, because most townhome and condo associations control exterior materials and colors. Check your CC&Rs first. We can provide product specifications and color samples for your application.

Q: Is James Hardie siding fire resistant? A: James Hardie fiber cement siding is classified as noncombustible when tested to ASTM E136, which wood siding is not. Siding is one part of a home's fire resistance, along with vents, roofing, windows, and the area around the house. To see whether your property falls in a CAL FIRE Fire Hazard Severity Zone, enter your address on CAL FIRE's online map.

Q: Can you replace my siding and windows at the same time? A: Yes, and it is often the better approach. With the siding removed, we can install new windows using the new construction method and fully flash each opening. One crew handles both, so you have one project instead of two.

Q: What is the difference between ColorPlus and painted James Hardie siding? A: ColorPlus Technology is a finish baked onto the siding in James Hardie's factory, so it holds color longer and is backed by a 15-year limited finish warranty. Primed siding is painted on site, which gives you unlimited color choices but needs repainting sooner.

Ready to replace the siding on your Pleasant Hill home?

Schedule a free, no-pressure consultation. We will look at your current siding, check for damage underneath, walk through profiles and colors, and give you an itemized estimate, with no obligation. Prefer to see the products first? Our Pleasanton showroom has full-size James Hardie displays.

Visit our Pleasanton showroom (2142 Rheem Drive, Suite E, Pleasanton, CA 94588) Phone: (925) 249-2280

Financing options

We offer 18 months with no payments and no interest if the balance is paid in full within the promotional period, or 4.99% financing on approved credit. Ask about options during your consultation.

See financing details

Nearby areas we also serve

Custom Exteriors also installs James Hardie siding in Walnut Creek, Concord, Lafayette, and Rossmoor, and serves nearby Martinez. See everything we offer in Pleasant Hill, or view our full service area list.